AIM MXP DATA LOGGING DASH WITH GPS 09 2M

 AIM MXP 1.3 Dash Logger features a 6" wide colour TFT display with great visual impact, configurable to show all the data coming from the vehicles Engine Control Unit (ECU), 8 analogue inputs, 6 digital inputs, pre-defined math channels, a second CAN and an included GPS Module. The 6" MXP 1.3 offers 50% more display area than the 5" MXS dash logger, in a similar dimension package making this dash suitable for both cars and motorcycles.


GPS09 module (included with dash): The GPS09 Module connected via CAN to the MXP 1.3 makes lap time calculation and track position analysis very easy. Each MXP 1.3 memory stores more than 200 world tracks start/finish line coordinates: as soon as MXP 1.3 is switched on, the GPS09 Module will locate its position, identify track-line coordinates and start immediately sampling lap and split time. If the track is not included in the database, it is always possible to add the start/finish line coordinates to the MXP 1.3 via a PC before going to the track, using the new RaceStudio3 Track Manager software.

High Contrast TFT Display: The MXP 1.3 dash logger has a high contrast 6" TFT display: its visual quality being always optimised as its ambient light sensor keeps the backlight at the best brightness levels, avoiding the screen from dazzling you when it gets dark, whilst keeping it bright and visible during the day. 

Monitor data in freely-configurable pages: MXP 1.3 shows, together with RPM scale, all the data you need, like speed, water temperature and oil pressure and much much more... you can choose the custom pages you wish - including up to four additional fields - from a wide library of page styles, defining which data is to be shown, their end of scale and measure units. Swapping between the pages is easy using the push buttons, or if the dash is out of reach using the optional remote button interface

Flexible shift lights and alarms: The 10 multi-coloured RGB shift lights can be customised to your liking, defining the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them in order to turn them on/off depending on analogue or digital inputs, ECU values, expansion values, math channels or - optionally - GPS information. You choose conditions and colours: select a solid alarm or flashing one - and the flashing frequency. It is also possible to configure an accompanying text message on the display, and set the alarm priorities.

CAN output: With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.

Digital output: MXP 1.3 features two digital outputs. These LOW SIDE type (switch to ground): can be configured in order to be activated/deactivated depending on the value of the analogue/digital inputs. This allows you to automatically run external systems, i.e. to switch on/off additional lights or to activate/de-activate a cooling fan or circulation pumps etc when a certain event happens.

WiFi connectivity: Configure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection. Once the initial setup / configuration has been done using the USB cable, there is no need to use the cable again!

Camera inputs: Two analog camera inputs are available, to switch your display into a mirror camera, through pushbutton command or event management. Extremely useful in cars such as a Lotus Exige where the rear visibility is poor.

Connecting the MXP 1.3 dash logger to your car/motorcycle ECU (standard or racing) is very simple. Sample and display dozens of channels straight from the ECU. This is often the quickest and easiest setup, needing only 2 cable connections to the ECU instead of multiple connections to analogue sensors. The sampled data depends on the actual ECU but typically includes RPM, throttle position (TPS), oil / air / water temperature, oil pressure, battery voltage, speed, gear, lambda value (air / fuel ratio). The list of available ECU drivers (1,000+) is constantly being updated and added to.

A modular system: Using the built-in CAN bus you can add optional expansion modules to visualise additional info:

Channel Expansion - Add 4 additional 0-5 volt analogue channels.

TC Hub - Add 4 additional K-type thermocouple temperature sensors.

• 
  
  
  

  LCU-One Lambda Controller - Wide band lambda controller, with Bosch LSU 4.9 probe, providing air/fuel data, lambda value and exhaust gas temperature. The extremely precise measurement is very useful for engine tuning/set-up, allowing the user to perfectly tune the carburetion.
  SmartyCam HD / SmartyCam GP HD - Compact and robust HD camera / HD bullet camera - both designed for motorsports.

  
  
  
  

Delivery – Effort will be made to deliver the goods as soon as possible after your order has been accepted, and in any event within the time stipulated. Customer will receive goods in duration 2-5 days upon payment confirmed, Non Malaysia address will be depends on custom clearance of particular country. We will not be liable for any loss or damage suffered by you through any reasonable or unavoidable delay in delivery. In such case, we may inform you of the reason of the delay and will provide updates of the delivery as soon as we can.

The Saturday delivery service starts from 9:00am till 1:00pm. Orders must be placed before 5:00pm on Friday and all items must be in stock to qualify for delivery on the coming Saturday.

Returns – Goods which are proved to be unsuitable may be returned for refund, credit or exchange if they are returned to ourselves within 14 days of receipt. Returned goods are subject to the following conditions:

• Items are returned with carriage paid but the customer.
• Items are received in good condition to be able to resell.
• Items and original packing of the goods should be returned unused in their original condition in order to secure a refund. (We reserve the right to levy a charge to replace product packaging which is damaged or defected).
• Any items which have been specially ordered for you or manufactured to your specifications will not be refunded.
• Item returns are to be accompanied by the sender’s name and address, account number, order invoice number (which are found on the invoice), and reason for return. Please complete the relevant returns form.
• Items returned needs to have a written confirmation before sending the items back to us.
• We cannot accept responsibility for returned parcels which are undelivered, please retain your proof of postage or relevant documents to be able to track the parcel, you may require it on the event of a claim with your carrier.

Please contact our Customer Service Department for this – +6 03- 5633 3922/

+6 016-700 9090 (Wechat/Whatsapp) or email to admin@momentumautoparts.com

Momentum Autoparts Sdn Bhd are not responsible for any labour charges incurred during installation or removal of allegedly faulty (or incorrectly supplied) parts.

Shortages & Damage – Please advise our Customer Service Department of any problems with shortages or carrier damage within 5 working days of receipt. We regret that beyond this time, due to circumstances beyond our control we may be unable to process your claim.

Special Order – On any special order of items that we do not stock, we reserve the right to charge a full payment including freight charges order value to the customer’s credit/debit card, which is non-returnable in the event of cancellation, based upon the customer’s implicit instructions to order the goods on their behalf.

Please contact our customer service department, quoting your customer account number and order number if you have any questions or queries. You can do this by telephone directly on +6 03-5633 3922 / +6 016-700 9090 or email to admin@momentumautoparts.com